BD302i UHF Two-Way DMR Radio
Highlights
Antenna
Enhance signal receiving ability.
Speaker and Microphone
Provide clear receive and transmit audio.
IP54 Rated
IP54 rated for water and dust resistance. Compliant with MIL-STD-810-G for shock and vibration.
Push-to-talk Button
Power On/Off
Volume Up/Down
Programmable Buttons
Long-Life Battery
Powerful 2200mAh Lithium Ion batteries enable up to 16 hours of operation in digital mode and 12 hours in analog
Audio Jack
Micro USB Port
Functions
ERGONOMIC AND EASY TO USE
Tactile buttons for no-look PTT and emergency calling.
ANALOG OR DIGITAL OPERATION
The BD302i operates in analog or digital mode. Allows switching between the two modes for communication with analog radios.
HIGH QUALITY AUDIO
DMR digital technology provides excellent audio quality for reliable communication
EXTENDED TALK RANGE
Hytera’s innovative receiving technology extends talk range
LONG-LIFE BATTERY
Powerful 2200mAh Lithium Ion batteries enable up to 16 hours of operation in digital mode and 12 hours in analog
RELIABLE AND DURABLE
Compliant with MIL-STD-810-G for shock and vibration. IP54 rated for water and dust resistance.
SCANNING
Allows listening to communication activities on other channels.
EMERGENCY CALLING
One-touch Emergency Alarms can be sent to other radios with the programmable button. Improves worker safety and emergency response time.
ANTI-INTERFERENCE
Digital encoding and error correcting reduces signal interference on the same frequency.
DMR
DMR signaling enables group call, private call, and all call transmitting with PTT ID. Supports DMR Tier II repeaters to extend coverage.
PSEUDO TRUNKING
Automatically uses whichever digital timeslot is free to improve call connectivity and frequency efficiency.
AUDIO CHANNEL ANNOUNCEMENT
Voice announcement of channel number for quick and accurate channel switching, even in low visibility.
VOX
Voice activated microphone enables hands free operation. Also supported on external earpiece and microphone accessories.
Accessories for BD302i UHF Two-Way DMR Radio
Included as standard with BD302i UHF Two-Way DMR Radio
Audio
Programming
Charger & Power
Carrying
Technical Specifications
General
- Frequency Range
- UHF 400-470MHz
- Channel Capacity
- 48 Channels (24 Analog, 24 Digital)
- Zone Capacity
- 3 Zones with 16 Channels per Zone
- Channel Spacing
- 25/12.5kHz
- Operational Voltage
- 3.8W
- Battery
- 2200mAh (Li-Ion)
- Battery Life (5/5/90)
- 16 hours Digital, 12 hours Analog
- Weight
- 5 ounces (140g)
- Dimensions
- 3 31/32” x 1 15/16” x 1 1/32” (101 x 49 x 26mm)
- Frequency Stability
- ± 0.5ppm
- Antenna Impedance
- 50Ω
Receiver
- Digital Sensitivity
- 0.22µV (BER 5%)
- Analog Sensitivity
- 0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD)
- Adjacent Selectivity
- TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz
- Spurious Response Rejection
- TIA-603: 70dB @ 12.5/25kHz
- Intermodulation
- TIA-603: 65dB @ 12.5/25kHz
- Hum and Noise
- 40dB @ 12.5kHz, 45dB @ 25kHz
- Rated Audio Power Output
- 0.5W
- Rated Audio Distortion
- ≤5%
- Audio Response
- +1 to -3dB
- Conducted Spurious Emission
- <-57dBm
Transmitter
- RF Power Output
- UHF High Power: 2W UHF Low Power: 1W
- FM Modulation
- 11K0F3E @ 12.5kHz 16K0F3E @ 25kHz
- 4FSK Digital Modulation
- 12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
- Conducted/Radiated Emission
- -36dBm <1GHz, -30dBm >1GHz
- Modulation Limiting
- ±2.5kHz @ 12.5kHz
- FM Hum and Noise
- 40dB @ 12.5kHz, 45dB @ 25kHz
- Adjacent Channel Power
- 60dB @ 12.5kHz, 70dB @ 25kHz
- Audio Response
- +1 to -3dB
- Audio Distortion
- ≤5%
- Digital Vocoder Type
- AMBE++
- Digital Protocol
- ETSI-TS102 361-1,-2,-3
Environmental
- Operating Temperature
- -22oF to +140oF (-30oC to +60oC)
- Storage Temperature
- -40oF to +185oF (-40oC to +85oC)
- ESD
- IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air
- Dust and Water Ingress
- IP54 Standard
- Humidity
- Per MIL-STD-810 C/D/E/F/G Standard
- Shock and Vibration
- Per MIL-STD-810 C/D/E/F/G Standard