MD622i
Highlights
VOLUME
EMERGENCY BUTTON
AUDIO/PROGRAMMING PORT
LCD STATUS DISPLAY
PROGRAMMABLE BUTTONS
CHANNEL SELECTOR
POWER
INTERNAL SPEAKER
RF ANTENNA PORT
DC POWER SUPPLY REQUIRED
DB26 ACCESSORIES PORT
GPS PORT
Functions
High Quality Audio
Audio equalizer adjusts low, mid, and high frequency gain. Provides the best audio performance in noisy or quiet environments
Dual Mode
Operating in Analogue and Digital mode to aid your migration from Analogue to Digital two-way radio technology.
GPS (Optional Accessory)
Enables real-time location tracking for dispatch applications (requires external GPS module and GPS antenna)
Bluetooth Audio (Optional)
Wireless connectivity to audio devices to improve user experience.
Reliable and Durable
The MD622i is compliant with MIL-STD-810 G for impact strength and durability, and IP54 water and dust ingress
Increased Coverage Range
With a high RF power output up to 50W, the MD612i dramatically extends communication range
Analog & Digital Auto-Detect
Simultaneously monitors analog and digital modes and automatically responds in each mode
Analog Signaling
Supports HDC1200 signaling for Caller ID and Emergency Calls in analog mode, and is compatible with MDC1200 signaling used by other analog radios. The MD622i can decode DTMF tones while in analog mode for Caller ID signaling
Pre-Programmed Text Messaging
One-touch sending of up to ten pre-programmed text messages
Emergency Alarms
Emergency Alarms can be sent to other radios via the one touch emergency button. mproves worker safety and emergency
Systems and Network
Roaming
This feature enables the radio to switch between sites, ensuring seamless communication.
Pseudo Trunking
Using pseudo-trunking, a Hytera patented technology, communication slots can be shared to improve capacity usage with transmissions either direct to devices or to repeater.
Digital Encryption
Ensure your radio transmissions are secure with end-to-end encryption
DMR Tier II
The MD622i can be deployed on DMR Tier II systems
Radio Registration Service
RRS allows the MD622i to communicate with dispatch and unified communications applications
Accessories for MD622i
Included as standard with MD622i
Audio
Charger & Power
Programming
Other
Installation
Technical Specifications
General
- Frequency Range
- UHF: 400-470 MHz* VHF: 136-174 MHz
- Channel Capacity
- 256 Channels (128 Analog, 128 Digital)
- Zone Capacity
- 16 Zones with 16 Channels per Zone
- Channel Spacing
- 25/12.5kHz
- Operational Voltage
- 13.6 V ±15%
- Weight
- 1100g (2.4 pounds)
- Dimensions
- 6 15/32” x 1 11/16” x 1 15/16” (164 x 43 x 150 mm)
- Frequency Stability
- ± 0.5ppm
- Antenna Impedance
- 50Ω
- LCD Display
- 128x64 pixels, 1.5 inch, 4 lines
Receiver
- Digital Sensitivity
- 0.3µV (BER 5%)
- Analog Sensitivity
- 0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD) 0.3µV (12dB SINAD)
- Adjacent Selectivity
- TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz
- Spurious Response Rejection
- TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz
- Intermodulation
- TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz
- Hum and Noise
- 40dB @ 12.5kHz, 45dB @ 25kHz
- Rated Audio Power Output
- Internal (@ 16 ohm load): 4W External (@ 8 ohm load): 8W
- Max. Audio Power Output
- Internal (@ 16 ohm load): 6W External (@ 8 ohm load): 12W
- Rated Audio Distortion
- ≤3%
- Audio Response
- +1 to -3dB
- Conducted Spurious Emission
- <-57dBm
Transmitter
- RF Power Output
- VHF High Power: 5-50W UHF High Power: 5-45W
- FM Modulation
- 11K0F3E @ 12.5kHz 16K0F3E @ 25kHz
- 4FSK Digital Modulation
- 12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
- Conducted/Radiated Emission
- -36dBm <1GHz / -30dBm >1GHz
- Modulation Limiting
- ±2.5kHz @ 12.5kHz ±5.0kHz @ 25kHz
- FM Hum and Noise
- 40dB @ 12.5kHz, 45dB @ 25kHz
- Adjacent Channel Power
- 60dB @ 12.5kHz, 70dB @ 25kHz
- Audio Response
- +1 to -3dB
- Audio Distortion
- ≤3%
- Digital Vocoder Type
- AMBE++
- Digital Protocol
- ETSI-TS102 361-1,-2,-3
Environment
- Operating Temperature
- 22oF to +140oF (-30oC to +60oC)
- Storage Temperature
- -40oF to +185oF (-40oC to +85oC)
- ESD
- IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air
- Dust and Water Ingress
- IP54 Standard
- Humidity
- Per MIL-STD-810 C/D/E/F/G Standard
- Shock and Vibration
- Per MIL-STD-810 C/D/E/F/G Standard