PD412i

Handheld | DMR

Highlights

diagram indicating highlights of PD412i

Operational Efficiency with RFID

The data auto-transmission feature enables the PD412i and Hytera Patrol System to control asset management or radio tagging and allocation

Clear Communication

Thanks to the latest audio processing technology and in-built speaker, the PD412i offers you outstanding audio quality

Analog or Digital

Detects either signal and automatically switches between modes to receive on a single channel

Instant Messaging

Supports pre-programmed messaging to individuals or groups

Long Battery Life

Operating time of approximately 16 hours in digital mode

Functions

Created with Sketch. Radio Check

YES (decode only) (requires firmware upgrade)

Created with Sketch. Stun / Unstun

YES (decode only) (requires new hardware, firmware upgrade & chargeable license key)

Created with Sketch. Quick Text Messages

Up to 10 pre-programmed via CPS

Created with Sketch. Mixed Mode Operation

YES

PD41 X 11 170210 105102

Created with Sketch. RSS

YES (requires firmware upgrade)

Created with Sketch. Roaming

YES (requires new hardware, firmware upgrade & license key)

Created with Sketch. Emergency Mode

YES (requires firmware upgrade)

Created with Sketch. RFID Reader

YES (range 40mm)

Accessories for PD412i

Included as standard with PD412i Included as standard with PD412i

Antenna

Carrying

Battery

Installation

Charger & Power

Audio

Other

Systems that work with PD412i

DMR Applications

Technical Specifications

General

Frequency Range
UHF 400-470MHz, 450-520MHz VHF 136-174MHz
Channel Capacity
256 Channels (128 Analog, 128 Digital)
Zone Capacity
3 Zones with 16 Channels per Zone
Channel Spacing
25/12.5kHz
Operational Voltage
7.4W
Battery
1500mAh (Li-Ion) Standard, 2000mAh Optional
Battery Life (5/5/90)
1500mAh: 16 hours Digital, 12 hours Analog 2000mAh: 22 hours Digital, 16 hours Analog
Dimensions
4 13/32” x 2 11/16” x 1 7/32” (112 x 55 x 31mm)
Weight
9.8oz (280g)
Frequency Stability
± 0.5ppm
Antenna Impedance
50Ω

Receiver

Digital Sensitivity
0.22µV (BER 5%)
Analog Sensitivity
0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD) 0.22µV (12dB SINAD)
Adjacent Selectivity
TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz
Spurious Response Rejection
TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz
Intermodulation
TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz
Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
≤3%
Audio Response
+1 to -3dB
Conducted Spurious Emission
<-57dBm

Transmitter

RF Power Output
VHF High Power: 5W VHF Low Power: 1W UHF High Power: 4W UHF Low Power: 1W
FM Modulation
11K0F3E @ 12.5kHz 16K0F3E @ 25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm <1GHz, -30dBm >1GHz
Modulation Limiting
±2.5kHz @ 12.5kHz ±5.0kHz @ 25kHz
FM Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Adjacent Channel Power
60dB @ 12.5kHz, 70dB @ 25kHz
Audio Response
+1 to -3dB
Audio Distortion
≤3%
Digital Vocoder Type
AMBE++
Digital Protocol
ETSI-TS102 361-1,-2,-3

Environmental

Operating Temperature
-22oF to +140oF (-30oC to +60oC)
Storage Temperature
-40oF to +185oF (-40oC to +85oC)
ESD
IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air
Dust and Water Ingress
IP54 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock and Vibration
Per MIL-STD-810 C/D/E/F/G Standard